Indyme Solutions Inc CB432 Benutzerhandbuch

1                                        

 

The CB432 is a 1-button Shopper Call Box designed for use at Customer 
Service locations. The CB432 has a large HELP Button designed for ease 
of use in service applications. The Call Box must be properly programmed 
to communicate with a control unit. Un-programmed call boxes default to 
Alarm Code 001. Triggering a call box at this address may trigger an 
advisory message or trigger no message at all. 
 
 
 

 
 
Programming a call box requires a series of button presses. The specific buttons vary by call 
box type. On the CB432, SET is the “large clear button in the middle” and RESET is the 
“black outer casing”. The assurance LED is red and is located BEHIND the SET button. 
This LED will flash during programming to indicate your progress. 

Call Boxes use a hierarchy based menu structure. You must enter the Programming Menu first, 
to select the desired submenu. Each submenu may have one or more options available. These 
options are used to assign specific operational characteristics to the call box. Review the 
submenus/options before you begin programming. The submenus/options will vary by call box 
model. 

 
 
 
 

Press and hold the RESET button until the assurance LED flashes one time. 

Press and hold the SET button, until the assurance LED flashes two times. 

Press and hold the RESET button, until the assurance LED flashes three times. 

The call box is now in the Programming Menu mode, proceed to the desired submenu. 
(***)