Alcatel USA Marketing Inc. 9558L-D Benutzerhandbuch

Radio

For the management of mono-directional radio links, different configurations are needed 
on each side of the link.

On the node where the link works in Tx only:

ATPC, ACM should not be enabled: they cannot work

LAG L1, Ring should not be created: they cannot work

Radio PM should not be enabled: they work Rx side

Link Identifier should not be enabled: it works Rx side

PPP must be disabled (otherwise a PPP Failure alarm will be raised)

For monodirectional links with the MPT-HLS, the space diversity combiner should 
not be equipped on the transmitter side.

For monodirectional links with the MPT-HLS, the RF switch should be mounted and 
connected.

“No Rx Radio Alarms” alarm profile must be configured in the radio panel (otherwise 
all the Rx Radio alarms will be raised)

On the node where the link works in Rx only:

Transmitter must be muted with a TX Mute command 

ATPC, ACM should not be enabled: they cannot work

LAG L1, Ring should not be created: they cannot work

PPP must be disabled (otherwise a PPP Failure alarm will be raised)

For monodirectional links with the MPT-HLS, the space diversity combiner should 
be equipped only on the receiver side.

For monodirectional links with the MPT-HLS, the RF switch should be mounted and 
connected.

“No Tx Radio Alarms” alarm profile must be configured in the radio panel (otherwise 
all the Tx Radio alarms will be raised)

The JF6-9558H/6933B-9500MPT (MPT-HL) unlicensed radio provide fast deployment of 
service with microwave radio. No license and small antennas (no FCC and Industry Canada 
(IC) requirements) allow immediate Turn-Up. After the license is received, the unlicensed 
MPT-HL radio can be easily converted to the lower 6 GHz licensed band.

DRAFT