ParkerVision D2D00002 Benutzerhandbuch

Seite von 37
HZ1500USB Wireless USB LAN Adapter 
21
4.4 CURRENT CONNECTION SECTION
This section shows the connection that is currently active, giving the status of each category described in the 
AVAILABLE CONNECTION SECTION on the previous page. The SPEED indicates the rate of data transfer 
as dictated by the Access Point to which the Wireless LAN Adapter is connected.
4.5 ACCESS TRAY SECTION
If the START IN SYSTEM TRAY option is toggled, the HORIZONS (H) icon will appear in the system 
tray on start-up.
• Click the www.direct2data.com button to access the Horizons-Wireless home page.
• Click the HELP option to view the user manual
• Click DONE to exit the D2D Management Utility
• Click OPTIONS to set the options shown below
•  SSID is broadcast by the Access Point or in Ad-Hoc by all 
members in the connection.  Occasionally SSID is hidden and 
the user needs to input the correct name.
•  Channel can be set by the user when in Ad-Hoc.  In AP 
Mode, the Access Point sets the channel.
•  Connect to Access Point or Ad-Hoc
• Select the appropriate WEP encryption option: Off, 64-bit, 
or 128-bit.  
  Most PUBLIC locations leave WEP off.  
  PRIVATE Ad-Hoc connections will default to WEP 64-bit 
enabled.  The exact key must match the AP or Ad-Hoc member, 
i.e. Key 1: 3451237890.  Connection is established even if the 
key is incorrect, however, data will not be allowed to transfer 
with the correct key.  Four unique keys can be remembered, 
one is selected as the default for use when WEP is enabled.  
Verify with your IT professional the setting for your network.