ParkerVision D2D00004 Benutzerhandbuch

21

®

This section shows the connection that is currently active, giving the status of each category described 

in the 

AVAILABLE CONNECTION SECTION on the previous page. The SPEED indicates the rate of 

data transfer as dictated by the Access Point to which the Wireless LAN Card is connected.

If the START IN SYSTEM TRAY option is toggled, the ParkerVision (H) icon will appear in the 

system tray on start-up.

• Click the www.direct2data.com button to access the ParkerVision-Wireless home page.

• Click the HELP option to view the user manual

• Click DONE to exit the D2D Management Utility

• Click OPTIONS to set the options shown below

•  SSID is broadcast by the Access Point or in Ad-Hoc by   

   all members in the connection.  Occasionally SSID is   

   hidden and the user needs to input the correct name.

•  Channel can be set by the user when in Ad-Hoc. In AP 

    Mode, the Access Point sets the channel.

•  Connect to Access Point or Ad-Hoc

•  Select the appropriate WEP encryption option: Off,    

   64-bit, or 128-bit.  

Most PUBLIC locations leave WEP off.  

PRIVATE Ad-Hoc connections will default to WEP 64-bit 

enabled.  The exact key must match the AP or Ad-Hoc 

member, i.e. Key 1: 3451237890.  Connection is established 

even if the key is incorrect, however, data will not be allowed 

to transfer with the correct key.  Four unique keys can be 

remembered, one is selected as the default for use when 

WEP is enabled.  Verify with your IT professional the setting 

for your network.