Accutech Security LLC HWHY-662017 Benutzerhandbuch
Page 1 of 2
CUT SHEET: Wander Wearable Tag
A Wander Wearable Tag is a stylized form fitting waterproof tag and band worn by a resident or patient. When a resident
or patient enters a Tx Activation Field, the Tag sends a signal to the receiver in the door controller. The door controller
processes this information for an appropriate response (e.g., sounding alarms, locking doors). Door controllers can be an
LC Unit, ES Unit or a LS unit. WW (L) is for LC and ES systems and WW (S) is for LS and IS systems. The WW tags are
warranted for 6 months and have been engineered for greater than 6 months usage and can be activated/deactivated with a
STAD or IDTAD. The WW tag is used with band, part # 100917-5 (5 pack).
ELECTRICAL:
Power: 3.0V lithium battery
or patient enters a Tx Activation Field, the Tag sends a signal to the receiver in the door controller. The door controller
processes this information for an appropriate response (e.g., sounding alarms, locking doors). Door controllers can be an
LC Unit, ES Unit or a LS unit. WW (L) is for LC and ES systems and WW (S) is for LS and IS systems. The WW tags are
warranted for 6 months and have been engineered for greater than 6 months usage and can be activated/deactivated with a
STAD or IDTAD. The WW tag is used with band, part # 100917-5 (5 pack).
ELECTRICAL:
Power: 3.0V lithium battery
MECHANICAL:
Tag Size: 2.25” x 0.625” x 0.875”
Tag Weight: 0.5 ounce
Band Size: 14.25” x 0.95” x 0.25”
Band Weight: 0.25 ounce
Tag Size: 2.25” x 0.625” x 0.875”
Tag Weight: 0.5 ounce
Band Size: 14.25” x 0.95” x 0.25”
Band Weight: 0.25 ounce
OPERATING CHARACTERISTICS:
Transmit Frequency: 418 MHZ
Receive Frequency: 127-137 kHz
FCC ID: JM7-HWHY-662017
Canada IC: 2683A-662017
Transmit Frequency: 418 MHZ
Receive Frequency: 127-137 kHz
FCC ID: JM7-HWHY-662017
Canada IC: 2683A-662017
ATTACHMENT:
WW Tags are attached with a size adjustable silicon band. The
band is designed to resist tearing caused by pulling or chewing on
the band. However, if the band becomes frayed or torn it will need
to be replaced. The band should be replaced periodically for
cleanliness. Tags are typically attached to a wrist or ankle.
band is designed to resist tearing caused by pulling or chewing on
the band. However, if the band becomes frayed or torn it will need
to be replaced. The band should be replaced periodically for
cleanliness. Tags are typically attached to a wrist or ankle.
MAINTENANCE:
WW Tags are reusable but they must be thoroughly cleaned
and sanitized between applications.
Acceptable cleaning methods:
Antibacterial wipes or Hydrogen peroxide (wipe, do not soak)
and sanitized between applications.
Acceptable cleaning methods:
Antibacterial wipes or Hydrogen peroxide (wipe, do not soak)
In long-term applications, periodically replace the bands and
clean the Tags.
clean the Tags.
TESTING:
Enter a monitored zone (Alarm may sound)
With an STAD, IDTAD or TTS
STORING:
To preserve battery life and prevent nuisance alarms, WW Tags
should be turned off with an STAD or IDTAD, stored away from
sources of electrical noise, and stored in a metal container with
lid. Extra Tag bands should be stored in a clean and dry
environment.
should be turned off with an STAD or IDTAD, stored away from
sources of electrical noise, and stored in a metal container with
lid. Extra Tag bands should be stored in a clean and dry
environment.
ENVIRONMENTAL:
Operating Temperature: 32º to 120º Fahrenheit
Access Control Accessory
Tag Model Number: WW (L)
Part Number: 77L017
Tag Model Number: WW (S)
Part Number: 77S017
Band Model Number:
Part Number: 100917-5
800-356-2671 |
Accutech
|
www.AccutechSecurity.com