Innovative Control Systems Inc IGWT-660098 Benutzerhandbuch

 

  Overview 
  Tag material 
  Attaching Tags 
  Tag and Band Maintenance  
  LED Tag 
  The TAD 

 

The LC system uses LC 1200 System Tags 
(Figure 3.1). The Tags have two styles –  

  LT (Long Term) (

Part # 77L016

) 

  SB (Slotted Back) (

Part # 67L016

) 

The Tag band (

Part # 100901

) is made of 

nylon-mesh-reinforced vinyl (latex-free). 
The band is designed to resist tearing caused 
by pulling or chewing on the band. 
However, if the band becomes frayed or torn 
it will need to be replaced. In long-term 
applications, the band should be replaced 
periodically for cleanliness. 

 

 

The Tag case is made of FDA-approved 
Lexan® plastic and the Tag band is latex-
free. 

To attach an LT/SB Tag to the resident use 
the following instructions: 

 
1.  With the snaps pointing in the same 

direction as the Accutech logo, slide 
the plastic band through the Slot. 
(

Figure 3.2

). 

 

 

 
2.  Adjust the band length to the nearest 

accommodating hole for a 
comfortable fit around the resident’s 
extremity. 

 Once the band is secured, it 

cannot be adjusted. 

 

3.  Put the male part of the Snap 

through the selected hole. 

 
4.  Fold over the female part of the 

Snap and secure to the male part by 
squeezing until they snap together. 

 

5. 

Using scissors, trim any excess band 
material (Figure 3.3).