Innovative Control Systems Inc IGWT-660098 Benutzerhandbuch

  Specifications 
  Positioning 
  Mounting 
  Wiring to the Keypad 
  Wiring to the LC unit 

The Push Button Override (PBO) (

Part # 700022

; 

Figure 7.1

) triggers the Keypad’s Escort function; 

this option overrides the presence of a Tag in the 
zone to allow free access through the doorway 
(no locks or alarms) from the non-Keypad side 
of the door. 

The PBO uses three LEDs: 

  The Green LED indicates power. 

  The Red LED indicates an alarm.  

  The Yellow LED indicates the PBO has 

been activated and the allotted escort 
time is in progress. The time allotted to 
pass through the doorway or zone is the 
same as the Escort time on the Keypad. 

 

 

Power Requirements 

 

Temperature 

 

Weight 

12V DC @ 55 mA 

 The PBO triggers the Keypad; therefore, 

the PBO current draw is based on the Keypad 
used. 

The PBO operates best in an ambient 
temperature between 35 and 90 degrees 
Fahrenheit. Operation outside of this range may 
cause unexpected or undesirable results, 
including premature failure.  

A PBO weighs approximately 4.3 ounces. 

The PBO should be positioned on the side of the 
door opposite the Keypad. In other words, if the 
Keypad is on the inside of the door, the PBO 
should be on the outside of the door. The PBO 
can be flush mounted or surface mounted using 
the appropriate mounting box and hardware.