Lutron Electronics Company Inc 0097 Benutzerhandbuch
LUTRON
Control Unit
Quick Installation
and Operation Guide
®
Please Read
The GRAFIK Eye
®
QS control unit allows for control
of both lights and shades, without interfaces, using
a single control unit. Features include pushbutton
scene recall, info screen that displays energy savings
and status, IR receiver, astronomic timeclock, contact
closure input, and engravable backlit buttons that are
easy to find and operate.
Model Numbers: QSGRJ-3P, QSGRJ-4P, QSGRJ-6P
QSGR-3P, QSGR-4P, QSGR-6P
120 V
50/60 Hz
220 - 240 V
50/60 Hz
Unit Capacity (watts)
2000 W
3000 W
MLV
2000 VA
1600 W
3000 VA
2400 W
Zone Capacity (watts)
25 – 800 W
40 – 1200 W
MLV
25 – 800 VA
25 – 600 W
40 – 1200 VA
40 – 960 W
See page 6 for IEC PELV/NEC
®
Class 2 ratings.
For California residents only:
The batteries in these devices contain
Perchlorate Material – special handling may apply.
For more information visit
www.dtsc.ca.gov/hazardouswaste/perchlorate
Contents
Features and Functions of the
GRAFIK Eye
®
QS Control Unit
. . . . . . . . . . . . . . . . .
2
Wiring the GRAFIK Eye
®
QS Control Unit
Overview of Line Voltage/Mains Wiring . . . . . . . . . 3
Line Voltage Wiring Details . . . . . . . . . . . . . . . . . . . 4
Overview of IEC PELV/NEC
®
Class 2 Wiring . . . . . 6
QS Link Control Wiring Details . . . . . . . . . . . . . . . . 7
Power Group Wiring Example . . . . . . . . . . . . . . . . 8
Completing Installation of the
GRAFIK Eye
®
QS Control Unit . . . . . . . . . . . . .
9
Programming Mode
Entering and Exiting Programming Mode . . . . . . 10
Navigating Menus in Programming Mode . . . . . . 10
Wireless Mode . . . . . . . . . . . . . . . . . . . . . . . . .
11
FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Zone Setup
Assigning Load Types . . . . . . . . . . . . . . . . . . . . . . 12
Assigning Non-Dim Load Type . . . . . . . . . . . . . . . 12
Setting Load Types . . . . . . . . . . . . . . . . . . . . . . . . 13
Scene Setup
Setting Zone Levels, Fade Rates,
and Shade Group Actions . . . . . . . . . . . . . . . . . 14
Occupancy Sensor Setup . . . . . . . . . . . . . . . .
15
Scene Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Configuring Occupancy Sensor Settings
(optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Pico
®
Wireless Control Setup:
Associating with a GRAFIK Eye
®
QS
Wireless Control Unit . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .
19
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
Contact Information . . . . . . . . . . . . . . . . . . . .
20
For additional features and advanced functions,
see the complete installation and operation guide at
www.lutron.com/qs
English
Español
Français