Trimble Inc. 10950 Benutzerhandbuch
Alloy GNSS reference receiver User Guide
105
Issue
Possible cause
Solution
The receiver is not
receiving satellite
signals
receiving satellite
signals
The GNSS antenna cable is
loose.
The cable is damaged.
The GNSS antenna is not in
clear line of sight to the sky.
loose.
The cable is damaged.
The GNSS antenna is not in
clear line of sight to the sky.
Make sure that the GNSS antenna cable is tightly seated in the antenna
connection on the GNSS antenna.
Check the cable for any signs of damage. A damaged cable can inhibit signal
detection from the antenna at the receiver
connection on the GNSS antenna.
Check the cable for any signs of damage. A damaged cable can inhibit signal
detection from the antenna at the receiver
•
Make sure that the GNSS antenna is located with a clear view of
the sky.
the sky.
•
Restart the receiver as a last resort (turn off and then turn it on
again).
again).