Trimble Inc. 642356X-B1 Benutzerhandbuch
3 Setting up the Receiver
1 6 Trimble R7/R8 GPS Receiver User Guide
Tr
imble R7 GPS Receiver Oper
ation
The power/serial data ports are all 7 pin 0-shell Lemo connectors. Both
Port 2 and Port 3 can accept external power. For more information, see
Default Settings, page 80 and Cables and Connectors, page 87.
Port 2 and Port 3 can accept external power. For more information, see
Default Settings, page 80 and Cables and Connectors, page 87.
The TNC port connectors are color-coded for easy system setup.
Connect the yellow GPS antenna cable to the yellow TNC port marked
GPS, and connect the blue Range Pole antenna (RPA) cable to the blue
TNC connector marked RADIO. For more information on connecting
the Trimble R7 receiver, see the following sections in this chapter.
Connect the yellow GPS antenna cable to the yellow TNC port marked
GPS, and connect the blue Range Pole antenna (RPA) cable to the blue
TNC connector marked RADIO. For more information on connecting
the Trimble R7 receiver, see the following sections in this chapter.
31.4
Bottom panel
Figure 3.5 shows the bottom panel of the Trimble R7 receiver. This
panel contains the USB port, the CompactFlash port, and the
compartments for the two internal batteries.
panel contains the USB port, the CompactFlash port, and the
compartments for the two internal batteries.
Port 3
External radio, power in
GPS
GPS antenna
RADIO
Radio communications antenna
Table 3.1
Trimble R7 receiver receiver ports
Icon
Name
Connections