Trimble Inc. 6734890 Benutzerhandbuch
Glossary
19
Status screens
The receiver has several view-only status screens that allow you to review the current settings of the
receiver. The status screens provide the following information:
receiver. The status screens provide the following information:
• Position solution and precisions
• CMR and RTCM IDs or OmniSTAR satellite and link status
• Base name and code
• Latitude, longitude, and height
• Antenna height
• Horizontal and vertical precision
• Receiver model and hardware version
• Receiver firmware version
• Receiver serial number
• Receiver IP address
• CMR and RTCM IDs or OmniSTAR satellite and link status
• Base name and code
• Latitude, longitude, and height
• Antenna height
• Horizontal and vertical precision
• Receiver model and hardware version
• Receiver firmware version
• Receiver serial number
• Receiver IP address
To access these screens from the Home screen, press
or
.
Radio status
When a radio is installed (either 450 MHz or 900 MHz), the following status messages appear at the
top line of the screen:
top line of the screen:
Message Description
Tran
Transmitted a frame
Recv
Received a frame
Busy
Frame was blocked
Sync
Got sync with base station
Rept
Repeated a frame
Sig
Got carrier detect
Ovld
Radio bandwidth exceeded (data has probably been lost)