Trimble Inc. 7112-900IP Benutzerhandbuch
15
2.2
Configuration
The TC900 is configured at the factory for 38,400 baud, 8 data bits, none parity,
and one stop bit. The parameters are stored in non-volatile memory. The TC900
retrieves these parameters at power up.
and one stop bit. The parameters are stored in non-volatile memory. The TC900
retrieves these parameters at power up.
2.2.1
Configuration Software
COMMSET is a Windows-based program for configuring operational parameters
of the TC900. COMMSET can be used in the office to configure all wireless
modems for a project prior to deployment, or in the field at any time.
of the TC900. COMMSET can be used in the office to configure all wireless
modems for a project prior to deployment, or in the field at any time.
To install COMMSET, copy all files on the distribution diskette to a new
directory on your computer’s hard disk. To start the application, run the utility
COMMSET.EXE.
directory on your computer’s hard disk. To start the application, run the utility
COMMSET.EXE.
If you need help performing these tasks, consult your Windows documentation or
the Windows on-line help. COMMSET Setup can be used with Windows 95/98
or Windows NT.
the Windows on-line help. COMMSET Setup can be used with Windows 95/98
or Windows NT.
When COMMSET starts, an initial connection window, Figure 2-3, is displayed.
This window helps the user through the process of connecting a radio to the
computer. If more help is required, click on the
This window helps the user through the process of connecting a radio to the
computer. If more help is required, click on the
HELP
button for additional
instructions.