Trimble Inc. TC900C Benutzerhandbuch
4 Installing the SNR900 Network
2 2 SNR900 Operation Manual
Mounting the SNR900
To mount the SNR900 onto a machine:
1.
Bolt the SNR900 into the radio mounting bracket (upper and
lower brackets).
lower brackets).
Ensure that the radio mounting screws are all fitted with
washers and lock washers.
washers and lock washers.
2.
Securely mount the adapter plate to the machine. Do one of the
following actions:
following actions:
–
Use existing weld bosses (see Figure 4.4)
–
Weld some weld bosses to the cab
–
Clamp the plate to the top of a handrail at the top of the cab
using the U-bolts
using the U-bolts
3.
Bolt the radio mounting bracket to the adapter plate using the
rubber shock mount kit. The bolts are included with the adapter
plate.
rubber shock mount kit. The bolts are included with the adapter
plate.
B
Tip – Use threadlocking Loctite (PN 33803) or equivalent to secure the
bolts when you assemble the shock mounts.
bolts when you assemble the shock mounts.
SNR900.book Page 22 Friday, December 3, 2004 2:02 PM