Trimble Inc. WCSNM941 Benutzerhandbuch
4
|
Installation
SNM941 Connected Site Gateway Installation Guide |
18
b. Fastener mounting option 2:
–
Fasteners from above into mounting plate tabs
–
Sized for M6 Fasteners
–
Quantity of 3 used at a minimum
c. Fastener mounting option 3:
–
Fasteners from above into mounting plate tabs
–
Sized for M6 Fasteners
–
Quantity of 3 used at a minimum
d. Magnetic mount:
–
High Strength Rare Earth Magnets in 4 locations
–
Covered with a rubber boot that resists sliding and damage to the mounting surface
TIP –
Remove the mounting tab plate from the riser so that the magnets are exposed by
removing the four M4 flat head fasteners.
e. Adhesive mount:
–
Use 3 mm foam adhesive tape for slightly out flat surfaces.
–
Use magnets to help fixture during adhesive curing.
DRAFT