Trimble Inc. 613 Benutzerhandbuch
802.11g Wireless LAN+BT SiP combo Module V2.2
All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
Preliminary release for evaluation, Subject to be changed without Notice
4.8. DIMENSIONS, WEIGHT AND MOUNTING
The following paragraphs provide the requirements for the size, weight and mounting of the
WM-BG-MR-01 module.
WM-BG-MR-01 module.
4.8.1. DIMENSIONS
The size and thickness of the WM-BG-MR-01 module is listed below:
The height – will be finalized after the module design is frozen.
4.8.2. WEIGHT
Weight shall not exceed 10 gram including the shielding.
4.8.3. MOUNTING
The WM-BG-MR-01 module is B2B mounted type component. The B2B connector and additional
screw hole provide mounting mechanism to secure the WM-BG-MR-01 module against vibration and
shock on the host system.
screw hole provide mounting mechanism to secure the WM-BG-MR-01 module against vibration and
shock on the host system.
4.9. SHOCK AND VIBRATION
All shock and vibration test will be performed by using an interface adapter card. Additional
shock and vibration tests can be performed – on request – by using the real host being PDA,
Textbook or any other application. The interface card will provide mounting facility base on the
recommendation /application guide provided.
shock and vibration tests can be performed – on request – by using the real host being PDA,
Textbook or any other application. The interface card will provide mounting facility base on the
recommendation /application guide provided.