Trimble Inc. 614 Benutzerhandbuch

GeoExplorer 2008 Series User Guide     

Getting Connected     

You can use the Wireless Manager application to turn on and turn off the GeoExplorer 
2008 series handheld's wireless LAN radio and/or Bluetooth radio.  You can turn on 
and turn off both radios at the same time, or control each radio individually.

To open the Wireless Manager, do one of the following:  

•

Tap the Wi-Fi 

 icon or the Bluetooth icon 

  in the Today screen.

•

Tap 

, 

, or 

 in the title bar and then tap Wireless Manager.

•

Tap / Settings / Connections / Wireless Manager.

Turn on the wireless LAN radio and/or Bluetooth radio to be able to connect to other 
devices or networks.

Turn off the wireless LAN radio and/or Bluetooth radio to prevent the handheld from 
sending or receiving wireless signals. 

B

Tip – To conserve power, turn off the wireless LAN radio and/or the Bluetooth radio when 
not in use.

1.

Open the Wireless Manager (see above).  

2.

Do one of the following:

–

Tap 

 at the top of the screen to turn on 

both radios, or to turn off both radios if they 
are already on.

–

Tap 

 or 

 to turn on the radio 

that you want to use, or to turn off the radio 
if it is already on.

The status fields below the 

 button and the 

 button change from Off when the 

radios are turned on and show the current state of 
the radio. The Wi-Fi status field shows Connecting 
or Available, and the Bluetooth status field shows On or Visible.

3.

Tap 

 to exit the Wireless Manager.

After you turn on the wireless LAN radio, the wireless LAN icon 

 appears in the title 

bar to indicate that the wireless LAN radio is enabled. A second icon 

 appears if a 

wireless LAN network is detected, and a Notification for the detected network may 
appear in the left softkey.