Trimble Inc. 66400 Benutzerhandbuch

Juno Series User Guide     

Getting Connected     

Use Bluetooth wireless technology to receive data from a Bluetooth-enabled serial 
device, such as a laser rangefinder.

To connect to a Bluetooth-enabled serial device, you must:

1.

Connect to the Bluetooth-enabled serial device.

2.

Configure the COM port on the handheld to use for the connection.

3.

If necessary, configure the GPS field software to use data received from the serial 
device.

Connect the handheld to the Bluetooth-enabled device, selecting the Serial Port 
service if it is not already selected (see 

).

1.

On the Juno series handheld, tap 

/ 

Settings / Connections / Bluetooth.

2.

Tap the COM Ports tab. 

3.

Tap New Outgoing Port. 

4.

Select the device you want to set up the 
connection to and then tap 

on the right 

softkey.

5.

Select the COM port on the Juno series handheld 
to use for the connection.

The Juno series handheld has four COM ports 
(COM6, COM7, COM8 and COM9) available for 
connections out to Bluetooth-enabled serial 
devices.

6.

Do one of the following:

–

To communicate with any device, for example if you have formed this 
connection without pairing to a device, clear the Secure Connection check 
box.

–

To communicate only with devices with which the handheld has a 
Bluetooth partnership, select the Secure Connection check box.

7.

Tap 

on the right softkey.

8.

Tap 

 in the top right corner to close the Bluetooth application.

9.

Tap 

 in the top right corner to close the Settings screen.