Teledesign Systems Inc TS4000C Benutzerhandbuch

Seite von 4
Type Acceptance Information for TS4000 Radio Modem with 3422 Transceiver
Proposed FCC ID JWFTS4000C
Teledesign Systems, Inc Confidential Information
Page 1
PURPOSE
The purpose of this document is to provide information in support of type acceptance testing and
report generation in pursuit of a Grant of Equipment Authorization under FCC Parts 15 and 90 and
Industry Canada RSS-119, RSS-210 and ICES-003 for Teledesign’s TS4000 Radio Modem.
INTRODUCTION
The TS4000 is a high-speed radio modem that consists of a modem board, radio transceiver
board and metal enclosure.  The radio transceiver board connects to the modem board with a
flexible printed circuit.
Radio Transceiver Board
The radio transceiver board for this application is an E.F. Johnson DL3422.  This device is being
used without any modifications.  The DL3422 has received FCC type acceptance with an FCC ID
of ATH2423422-007. All circuit descriptions and details for the radio transceiver can be found in
the type acceptance document for the DL3422.  A copy of this has been included with this
application.  The radio transceiver is available in a frequency range from 132-174 MHz and
includes a temperature stable reference oscillator with a frequency stability of ± 2.5 PPM.
Modem Board
The modem board provides the serial data interfaces that the user’s equipment interfaces to.  The
modem board also controls the operation of the radio transceiver.  This control includes
controlling the radio power and frequency and also controlling the modulation, data rate and
frequency deviation of the transmit signal.  Note that it is this transmit signal that defines the
emission bandwidth and spectral efficiency.
Radio Flex Circuit
A flex circuit is used to interconnect the radio transceiver board to the modem board.  This flex
circuit is also used to interconnect the serial port 2 connector to the modem board.  The J11
interconnecting diagram included with the modem board schematic provides the specific
connections provided by the flex circuit for connecting the radio transceiver to the modem board.
Configuration Software
IBM compatible configuration software is used to control all aspects of configuration, tune up and
test of the TS4000 radio modem.
General Information
Manufacturer:
Teledesign Systems Inc.
2635 North First Street, Suite 205
San Jose, CA  95134
408-232-0180
Contact Person:
Mark Hubbard
Product Trade Name:
TS4000 Radio Modem
Product Model Number:
TS4000-05Cff
 where: ff - indicates frequency range
Proposed FCC ID:
FCC ID: JWFTS4000C
Production Plans:
Teledesign Systems Inc. plans to produce this product in
quantity (greater than 1) production runs.
Radio Transceiver Manufacturer:
E.F. Johnson