JVC KENWOOD Corporation 39923120 Benutzerhandbuch

35

Your dealer can activate a variety of transceiver functions to perform without any 
additional operation on your part.

The Time-out Timer is used to prevent any caller from using a channel for an 
extended period of time.

If you continuously transmit for a period of time that exceeds the programmed 
time, the transceiver will stop transmitting and an alert tone will sound.  To stop 
the tone, release the microphone PTT switch. Your dealer can program the TOT 
time in the range of 15 seconds to 20 minutes.

If programmed by your dealer, a pre-alert tone will sound before the timer expires.  
Also, if programmed by your dealer, you may have to wait for a short duration 
before you can continue to transmit.  If you press the microphone PTT switch
before the timer has been reset, an alert tone will sound and the transceiver will 
not enter transmit mode.

The signal strength indicator displays the strength of received signals.

Strong signal

 6XIÀFLHQWVLJQDO

  Weak signal

    Very weak signal

7KHFRPSDQGHULVSURJUDPPHGRQO\IRUVSHFLÀF&RQYHQWLRQDO)0FKDQQHOV,ILW
has been programmed by your dealer, transmitted signals are compressed before 
being sent and received signals are expanded when they arrive.

• Your dealer must set the compander for both the transmit side and the receive side in 

order for the compander to operate.

This background feature allows higher clarity of signals, avoiding excessive noise 
and interference.  This feature is not used on digital channels, as they are not 
susceptible to noise and interference.