Wi Lan Inc EB03 Benutzerhandbuch

Configuration

96

 AWE 120-24 Installation & Configuration Guide

One way to control remote access to a unit’s configuration menu is by restricting the type of link that can be 
used to make remote configuration changes. The default setting is to allow remote configuration changes with 
both wired and wireless links using telnet or SNMP. However, you can enable or disable the type of link 
independently with two settings: Ethernet Access to Local Host and Wireless Access to Local Host.

Note: Data will pass as usual between both units. These two settings restrict remote access to the unit’s 

depending on the type of link that exists between the remote terminal and the unit–wired or wireless. 
Also, you cannot "ping" a unit if the link is disabled.

➧ 

1.

From the Main Menu, select System Security and press 

. The System Security menu is 

displayed.

2.

Select Ethernet Access to Local Host and press 

. The data field highlights.

3.

Select the desired setting, where:

4.

Press 

. The new value appears in the field.

5.

Select Wireless Access to Local Hostand press 

. The data field highlights.

6.

Select the desired setting where:

7.

Press 

. The new value appears in the field.

8.

Press 

 to exit to the Main Menu.

on

Enable configuration changes to the unit via the Ethernet

off

Disable configuration changes to the unit via the Ethernet

on

Enable configuration changes to the unit via the air

off

Disable configuration changes to the unit via the air

                          System Security

SNMP Community Name 1             public

SNMP Community Name 2             netman

Change User Password              Press Enter to change password

Confirm User Password             Press Enter to confirm password

Change Supervisor Password        Press Enter to change password

Confirm Supervisor Password       Press Enter to confirm password

Ethernet Access to Local Host  -> on

Wireless Access to Local Host     on

Auto Logout Minutes (1-120)       10