Wi Lan Inc EB03 Benutzerhandbuch
Appendix D: SNMP
136
AWE 120-24 Installation & Configuration Guide
Wi-LAN Object Identifier Nodes
The AWE 120-24 uses SNMP version 1, which is MIB 2 compliant. All OID (Object Identifier) nodes in the
120-24 private Wi-LAN MIB are numbered 1.3.6.1.4.1.2686.2.n where n is a private Wi-LAN MIB node
number or branch of nodes.
120-24 private Wi-LAN MIB are numbered 1.3.6.1.4.1.2686.2.n where n is a private Wi-LAN MIB node
number or branch of nodes.
All nodes containing statistical information are cleared on power up and reset.
Values in all writeable nodes are stored in Flash memory and are retained until overwritten by the
administrator, even following power down or reset.
administrator, even following power down or reset.
Using SNMP
Refer to the documentation provided with your SNMP application software for instructions about using
SNMP. The procedure for changing a unit’s configuration with SNMP is described below.
SNMP. The procedure for changing a unit’s configuration with SNMP is described below.
To change a configuration setting with SNMP
1.
Change the parameter to a new value using the appropriate SNMP command.
2.
Reboot the unit with the new configuration using the rebootNewRfConfig node command.
See
See
3.
Save the new configuration to the unit’s flash memory using the saveConfToFlash node
command. See
command. See
From
To
Classification
1.3.6.1.4.1.2686.2.1.1
1.3.6.1.4.1.2686.2.1.104
Configuration
1.3.6.1.4.1.2686.2.1.100.1
1.3.6.1.4.1.2686.2.1.100.7
Configuration:
System Image List
1.3.6.1.4.1.2686.2.2.1
1.3.6.1.4.1.2686.2.2.7
System Status
1.3.6.1.4.1.2686.2.3.1
1.3.6.1.4.1.2686.2.3.32
Statistics
1.3.6.1.4.1.2686.2.4.1
1.3.6.1.4.1.2686.2.4.7
System Commands