Wi Lan Inc EB03 Benutzerhandbuch
IP Filter Configuration
JUL 2001 Rev 03
45
Enabling IP Packet Filtering
IP Packet filtering should initially be set to off so you can start from a known state and observe changes that
result from using the IP packet filter.
result from using the IP packet filter.
➧
To enable or disable IP packet filtering
1.
From the IP Filter Configuration menu, select IP Packet Filtering and press
Enter
. The data field
highlights.
2.
Scroll to choose on or off and press
Enter
to enable or disable packet filtering.
3.
Press
Esc
to save the setting and exit to the Main Menu.
Enabling IP Address Filtering
➧
To enable IP address filtering
1.
From the IP Filter Configuration menu, select IP Address Filtering and press
Enter
. The data
field highlights.
2.
Scroll to choose on or off and press
Enter
to enable or disable address filtering.
3.
Press
Esc
to save the setting and exit to the Main Menu.
Setting Default IP Address Filtering
This setting is inactive unless IP Address filtering has been enabled.
➧
To set default IP address filtering
1.
From the IP Filter Configuration menu, select Default IP Address Filtering and press
Enter
.
The data field highlights.
2.
Scroll to choose Pass or Block and press
Enter
.
3.
Press
Esc
to save the setting and exit to the Main Menu.
IP Filter Configuration
IP Packet Filtering -> off
IP Address Filtering on
Default IP Address Filtering Block
Filter Entry Range (0-255) Base Address State
------------------- ------------------- ------------------- -------------------
------------------- ------------------- ------------------- -------------------
1 100 192.168.1.1 Pass
2 10 192.168.1.51 Block