Wi Lan Inc EB03 Benutzerhandbuch

Configuration

66

 AWE 120-24 Installation & Configuration Guide

The output power ceiling is used to limit the maximum output transmit power of a remote unit.  The value 
entered is the amount of attenuation in dB below the  factory-set power ceiling.

➧ 

1.

From the Main Menu, select RF Station Configuration and press 

. The RF Station 

Configuration menu is displayed.

2.

Select User Output Power Adjust Ceiling and press 

. The data field highlights.

3.

Press the down arrow key to scroll through the list. Select a  values from 0 db (no power attenuation)
to –31 dB (maximum power attenuation) and press Enter.

4.

Press 

 to exit to the Main Menu.

                     RF Station Configuration

    Operating Mode                           Normal Mode

    RF Transmit Status                       unblocked

    Link Monitor Period (0=OFF, 1-10000)     0

    Test Mode Timer (1-1000)mins             5

    Base Station Only Parameters

    Maximum Remote Distance                  5 Km

    Link Monitor Remote Station Rank         1

    Remote Station Only Parameters

    Throttle Enable                          off

    Throttle Level (1-100)                   10   (640 kps)

    Link Monitor/Output Power                Dynamic Output Power

    User Output Power Adjust Ceiling      -> -5  dB

    Signal Margin (6-31) dB                   6

    Current Output Power Level Adjust        -21