Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Wi Lan Inc
  4. EB03
  5. Benutzerhandbuch

Wi Lan Inc EB03 Benutzerhandbuch

Download
Seite von 190
Configuration
74
 AWE 120-24 Installation & Configuration Guide
Setting the Center Frequency
The center frequency defines the channel a unit uses to transmit and receive. To ensure communication 
between units, all units in a system must have the same center frequency value.
➧ 
To set the center frequency
1.
From the Main Menu, select Radio Module Configuration and press 
Enter
. The Radio Module 
Configuration menu is displayed.
2.
Select Center Frequency and press 
Enter
. The data field highlights.
3.
Scroll to select the RF center frequency to apply to all units in the network.
4.
Press 
Enter
. The new setting is displayed in the "New" column.
5.
Select Reboot New RF Configuration and press 
Enter
. The unit reboots and the AWE 120-24 
Login menu is displayed. The unit now runs using the "Current" center frequency for the amount of 
time specified by the Current Test Minutes.
6.
To save the current setting(s) to flash memory, log in, go to the Main Menu, and select Radio Module 
Configuration,
 Save Current Config to Flash. See 
. 
7.
Press 
Esc
 to exit to the Main Menu.
                             Radio Module Configuration
                                      New         Current        Flash
Station Type                      Remote Unit   Remote Unit   Remote Unit
Station Rank (1-1000)             1             1             1
Center Frequency                  2.4400 GHz    2.4400 GHz    2.4400 GHz
Security Password 1  (Hex)        1             1             1
Security Password 2  (Hex)        10            10            10
Security Password 3  (Hex)        100           100           100
Security Password 4  (Hex)        1000          1000          1000
Security Password 5  (Hex)        10000         10000         10000
Scrambling Code      (Hex)        0             0             0
Acquisition Code     (0-15)       0             0             0
Config Test Minutes  (1-120)      30            30            30
Tx Power Level Adjust          -> 0 dB          0 dB          0 dB
Base Station Only Parameters
Repeater Mode                     off           off           off
System Symmetry Type              Asymmetric    Asymmetric    Asymmetric
Dynamic Polling Level (1-100)     1             1             1
Remote Station Only Parameters
Remote Unit RF Group (0-63)       0             0             0
Reboot New RF configuration       Press Enter to Execute
Save Current Config to Flash      Press Enter to Execute