Wi Lan Inc EB03 Benutzerhandbuch
Configuration
78
AWE 120-24 Installation & Configuration Guide
Adjusting the Tx Power Level
Tx Power Level Adjust enables you to reduce the transmit power output level by up to 31 dB. For example,
selecting a value of 0 sets the transmit power to maximum power, while selecting a value of –31 sets the
transmit power to 31 dB below maximum power. The value is the intial Tx power level and is reset
automatically when automatic power level adjustment is performed. See
selecting a value of 0 sets the transmit power to maximum power, while selecting a value of –31 sets the
transmit power to 31 dB below maximum power. The value is the intial Tx power level and is reset
automatically when automatic power level adjustment is performed. See
➧
To adjust the Tx power output level
1.
From the Main Menu, select Radio Module Configuration and press
Enter
. The Radio Module
Configuration menu is displayed.
2.
Select Tx Power Level Adjust and press
Enter
. The data field highlights.
3.
Scroll through the list and press
Enter
to select a power attenuation level. Choose a value between 0
and –31, where 0 means no Tx power attenuation and –31 means Tx power is attenuated by 31 dB.
4.
Press
Enter
. The new setting is displayed in the "New" column.
5.
Select Reboot New RF Configuration and press
Enter
. The unit reboots and the AWE 120-58
Login menu is displayed. The unit now runs using the "Current" acquisition code for the amount of time
specified by the Current Test Minutes.
specified by the Current Test Minutes.
6.
To save the current setting(s) to flash memory, log in, go to the Main Menu, and select Radio Module
Configuration,
Configuration,
Save Current Config to Flash. See
7.
Press
Esc
to exit to the Main Menu.
Radio Module Configuration
New Current Flash
Station Type Remote Unit Remote Unit Remote Unit
Station Rank (1-1000) 1 1 1
Center Frequency 2.4400 GHz 2.4400 GHz 2.4400 GHz
Security Password 1 (Hex) 1 1 1
Security Password 2 (Hex) 10 10 10
Security Password 3 (Hex) 100 100 100
Security Password 4 (Hex) 1000 1000 1000
Security Password 5 (Hex) 10000 10000 10000
Scrambling Code (Hex) 0 0 0
Acquisition Code (0-15) 0 0 0
Config Test Minutes (1-120) 30 30 30
Tx Power Level Adjust -> 0 dB 0 dB 0 dB
Base Station Only Parameters
Repeater Mode off off off
System Symmetry Type Asymmetric Asymmetric Asymmetric
Dynamic Polling Level (1-100) 1 1 1
Remote Station Only Parameters
Remote Unit RF Group (0-63) 0 0 0
Reboot New RF configuration Press Enter to Execute
Save Current Config to Flash Press Enter to Execute