Yaesu Musen Co. Ltd. 0A290X10 Benutzerhandbuch

 

Note: Position your mouth about 1/2” (1.5 cm) away from the microphone hole and 

speak in a normal voice.

⑦ ◄/► key

  Press these keys to switch the function menu.
 

  While the MENU screen is displayed, press the key to slide the on-screen menu to the 

right/left side.

⑧ MENU key

  Press this key to access the MENU.
⑨ CH▼/CH▲ key

  These keys are used to change the operating channel.
  Press the key momentarily, the channel increases/decreases one step. Holding the key, 

the channel increases/decreases continuously.

 

Secondary use:


 While  the  MENU  screen  is  displayed,  press  the  key  to  slide  the  on-screen  menu 

upward/downward.

 

 When in the PA or Fog mode, press the key to change the channel.

⑩ Display
  222 by 162 pixels full dot matrix display.
⑪ Soft keys
  These three programmable keys can be customized through the setup menu mode. 

When pressing one of these keys briefly, the key functions will appear at the bottom of 
the display.

⑫ Strobe Light
  When the 

[STROBE] soft key is pressed, the internationally-recognized Morse Code 

“S.O.S” message will light and flash repeatedly.

  From MENU → SETUP → CONFIGURATION → STROBE LED, you can select one 

option from “CONTINUOUS”, “SOS”, “BLINK 1”, “BLINK 2” and “BLINK 3”.

⑬ 16/S key

  Pressing this key immediately recalls channel 16 from any channel location. Holding 

down this key recalls the SUB channel (The default setting is channel 9). Pressing this 
key again reverts to the previous selected working channel.

⑭ Speaker
  The internal speaker is located here.
⑮ DISTRESS key

  This key is used to send a DSC distress call.
⑯ USB jack

  Use the micro USB type B jack for 

SSM-71H (RAM4W) battery charge.

  Note: When the DATA jack is securely covered with rubber cap, the SSM-71H meets 

the waterproofing performance.

Application for FCC / IC 

FCC ID: K660A290X10 / IC: 511B-0A290X10