Yaesu Musen Co. Ltd. VX-900U-3 Benutzerhandbuch
VX-900 O
PERATING
M
ANUAL
5
O
PERATION
Preliminary Steps
r Install a charged battery
pack onto the transceiver,
as described previously.
as described previously.
r Screw the supplied an-
tenna onto the Antenna
jack. Never attempt to op-
erate this transceiver
without an antenna con-
nected.
jack. Never attempt to op-
erate this transceiver
without an antenna con-
nected.
r If you have a Speaker/Mi-
crophone, we recommend that it not be connected
until you are familiar with the basic operation of
the VX-900.
until you are familiar with the basic operation of
the VX-900.
Quick Start
r Turn the top panel’s
V O L / P W R k n o b
clockwise to turn on
the radio on.
clockwise to turn on
the radio on.
r Turn the top panel’s CH
selector knob to choose
the desired operating
channel. A channel
name will appear on the
LCD. If you want to se-
lect the operating chan-
nel from a different Memory Channel Group, press
the Soft key (assigned to the Memory Group Up or
Down function) to select the Memory Channel
Group you want before selecting the operating chan-
nel. A Group name will appear on the LCD when-
ever the Soft key is pressed.
the desired operating
channel. A channel
name will appear on the
LCD. If you want to se-
lect the operating chan-
nel from a different Memory Channel Group, press
the Soft key (assigned to the Memory Group Up or
Down function) to select the Memory Channel
Group you want before selecting the operating chan-
nel. A Group name will appear on the LCD when-
ever the Soft key is pressed.
Note: Some models are programmed so that the
operating channels are selected by the Soft key
and the memory channel group is selected by the
CH selector knob. For further details, contact your
VERTEX STANDARD dealer.
operating channels are selected by the Soft key
and the memory channel group is selected by the
CH selector knob. For further details, contact your
VERTEX STANDARD dealer.