Kinpo Electronics Inc A100A Benutzerhandbuch
14
Click No when prompted "Do you want to restart your computer now?"
Configuring the ADSL modem for RFC1483 is completed. Go to the next step.
SETTING THE PVC VALUES
For RFC1483, the VPI and VCI have a default setting of 8 and 35 respectively.
To change the PVC values for RFC1483, follow the below instructions:
To change the PVC values for RFC1483, follow the below instructions:
From the Start menu, select "Programs", select "ITeX ADSL", select "K2", then
click on “Mapi” to execute the test application. Open the "Configuration" tab.
Select "PVC Setup for RFC1483". Enter a pair of recommended VPI/VCI values
from the table below, click “PVC Setting” to apply these values and to create a
new PVC setup.
click on “Mapi” to execute the test application. Open the "Configuration" tab.
Select "PVC Setup for RFC1483". Enter a pair of recommended VPI/VCI values
from the table below, click “PVC Setting” to apply these values and to create a
new PVC setup.
Parameter
Value
Meaning
VPI
0 - 255
Virtual Path Identifier
VCI
0 - 255
Virtual Channel
Identifier
Identifier
For first time setups, windows creates a PVC key registry, click "OK" to create a
PVC key in the registry, click "OK" at the successful window. The PVC setting
will be updated when the system is restarted.
PVC key in the registry, click "OK" at the successful window. The PVC setting
will be updated when the system is restarted.
Close the ITeX ADSL K2 Test Application window and restart the computer.