VTech Telecommunications Ltd 80-0048-00 Benutzerhandbuch

56

Configuring the Phone

To set the time format:
1.  From the Date & Time menu, ensure that 

Clock Time is highlighted.

2.  Press t or u to select a 12-hour clock (12am/pm) or 24-hour clock.
3.  Press 

Save

 .

To set the date format that appears on the idle screen:
1.  From the Date & Time menu, press q to highlight 

Clock date.

2.  Press t or u to select the desired date format (DD/MM/YY, MM/DD/YY, YY/

MM/DD)

3.  Press 

Save

 .

To set the Time Zone:
1.  From the Date & Time menu, press q to highlight 

Time Zone.

2.  Press 

Edit

 .

3.  Press p or q to select a setting. The time zone is set as an offset from GMT. 

For example, EST is -5, and PST is -8.

4.  Press 

Save

 . 

To enable or disable Daylight Savings Time adjustment:
1.  From the Date & Time menu, press q to highlight 

DST.

2.  Press t or u to select Enabled or Disabled.
3.  Press 

Save

 . 

To enable or disable the NTP (Network Time Protocol) server:
1.  From the Date & Time menu, press q to highlight 

NTP server.

2.  Press t or u to select Enabled or Disabled.
3.  Press 

Save

 . 

Note: If the NTP server is disabled, you must manually set the time and date. 

This setting is valid only if the system administrator has already configured 

the Network Time settings. For more information, see the VSP726 Deskset 

Administrator and Provisioning Guide.

To configure the NTP Server:
1.  From the Date & Time menu, press q to highlight 

NTP and then press 

Edit

 .

2.  On the NTP menu, enter the URL of the NTP server. Press the 

ABC

 key to 

switch between entering upper case letters, lower case letters, and numbers.

3.  Press 

Save

 .