VTech Telecommunications Ltd 80-5299-B00 Benutzerhandbuch
9
You can retrieve your voicemail messages from any telephone. If the indicators remain on
after all new messages have been reviewed, you can turn them off manually:
after all new messages have been reviewed, you can turn them off manually:
1.
Make sure the Handset is off.
2.
Press PROG to enter programming mode.
3.
Press
or
until the screen display MESSAGES WAITING.
4.
Press SELECT. The screen displays:
5.
Use
or
to choose YES or NO. Press SELECT or PROG to confirm. If you
choose YES, the MESSAGES WAITING animation on the Handset and the
MESSAGE LED on the Base will turn off.
MESSAGE LED on the Base will turn off.
Temporary Tone Dialing
If you have dial pulse (rotary) service, you can change from dial pulse to touch tone
dialing during a call by pressing
dialing during a call by pressing
*
. This is useful if you need to send touch tone signals
for access to telephone banking or long-distance services.
1
Dial the number.
2
Press
*
. Buttons pressed after this send touch tone signals.
3
After you hang up, the phone automatically returns to dial pulse (rotary) service.
Operating Range
This cordless telephone operates within the maximum power allowed by the Federal
Communications Commission (FCC). Even so, this Handset and Base can communicate
over only a certain distance — which can vary with the locations of the Base and Handset,
the weather, and the construction of your home or office. For best performance, keep the
Base antenna fully upright.
If you receive a call while you are out of range, the Handset might not ring — or if it
doesring, the call might not connect when you press PHONE . Move closer to the Base,
then press PHONE to answer the call.
If you move out of range during a phone conversation, you might hear noise or
interference. To improve reception, move closer to the Base.
If you move out of range without pressing OFF, your phone will be left “off the hook.”
To hang up properly, walk back into range, periodically pressing OFF .
Communications Commission (FCC). Even so, this Handset and Base can communicate
over only a certain distance — which can vary with the locations of the Base and Handset,
the weather, and the construction of your home or office. For best performance, keep the
Base antenna fully upright.
If you receive a call while you are out of range, the Handset might not ring — or if it
doesring, the call might not connect when you press PHONE . Move closer to the Base,
then press PHONE to answer the call.
If you move out of range during a phone conversation, you might hear noise or
interference. To improve reception, move closer to the Base.
If you move out of range without pressing OFF, your phone will be left “off the hook.”
To hang up properly, walk back into range, periodically pressing OFF .
Display Screen Messages
Telephone Operation
Screen Displays: When
** RINGING **
There is a call coming in.
CONNECTING...
The Handset is waiting for dial tone.
PHONE ON
The Handset is in use.
MESSAGES WAITING
You have recieved telephone company voice mail.
** PAGING**
The Base is paging the Handset.
HOLD
There is a call on hold.
BATTERY LOW
The battery needs to be recharged.
LIGHT OFF? YES