VTech Telecommunications Ltd 80-7009-01 Benutzerhandbuch

7

Getting started

Telephone base and charger installation

Use only the power adapter(s) supplied with this product. To order a replacement 
power adapter, visit our website at 

 or call   

. In Canada, dial 

.

The power adapters are intended to be correctly oriented in a vertical or floor 
mount position. The prongs are not designed to hold the plug in place if it is 
plugged into a ceiling, under-the-table or cabinet outlet.

•

•

Plug the power adapter into a power outlet not 
controlled by a wall switch.

DSL filters (not 
included) are required 

if you have DSL high-
speed Internet service.
The DSL filter must 
be plugged into the 

telephone wall jack.

Plug one end of the clear telephone 

line cord into the line 1 telephone 
wall jack or a DSL filter.

Plug one end of the black 

telephone line cord into the line 2 
telephone wall jack or a DSL filter. 

Plug the large end of the 

telephone base power 

adapter into a power outlet 
not controlled by a wall 

switch. 

Raise the antenna.

Route the power 
adapter cord through 
this slot.

Plug the small end of the telephone base 
power adapter into the power adapter jack 
on the back of the telephone base.

Plug the other end of the clear telephone line 
cord into the LINE 1/L1+L2 telephone jack at 
the back of the telephone base.

Plug the other end of 
the black telephone 
line cord into the     
LINE 2 telephone jack 
at the back of the 
telephone base.