VTech Telecommunications Ltd 80-7009-01 Benutzerhandbuch

76

Adding and registering handsets

The handset provided with your telephone system is already registered 
as HANDSET. Additional handsets registered to the telephone system are 

assigned in sequential order. If you register another new handset to your 
telephone system, the new registered handset is assigned HANDSET 2. 

Then, your first handset is renamed as HANDSET 1. This telephone system 

accommodates up to 12 handsets.
You can add new handsets (TL88002, purchased separately) to your 
telephone system, but each handset must be registered with the telephone 

base before use. When first purchased, each expansion handset shows 

Press [HOLD] on base for 4 sec, then press [#] on handset. You may need 
to charge the handset before registering to the telephone base. For more 

details on battery charging, see the table on page 8.

Register a handset to the telephone base
1. Before you begin registration, make sure the handset displays Press 

[HOLD] on base for 4 sec, then press [#] on handset.

2.  Place the unregistered handset in the telephone base. 
3. Press and hold HOLD on the telephone base for about four seconds until 

the telephone base displays Registering handset.... Then, release the 
HOLD button. While the handset is still in the telephone base, press # 

(pound key) on the handset. The handset shows Registering... Please wait 
and it takes up to 60 seconds to complete the registration. The handset 
and the telephone base show HANDSET X Registered (X represents the 

handset number assigned) and you hear a beep when the registration 
completes.

If the registration fails, the handset shows Registration failed. To reset the handset, unplug 
the power from the telephone base and the battery from the handset for a few seconds, then 
plug them back in. Try the registration process again.
You cannot register a handset if any other system handset is in use.

•

•

Appendix