VTech Telecommunications Ltd 80-7812-01 Benutzerhandbuch

6

Getting started

Headset base installation

Use the included corded phone interface cable to connect the 
headset to your corded telephone. Then plug the curly handset 
corded into the small box of the cable. You must slide the 
CORDED HANDSET CONNECTED switch on the headset base to 
select YES (page 8) for using the headset.

NOTE: The headset base and headset do not have an external ringer. When you 

receive calls, the headset earpiece plays an alert tone. If you have telephones 
connected to the same telephone line as the headset base, you can rely on the 
ringers of those telephones to alert you to incoming calls.

Plug the small end 
of the headset 
base power 
adapter into the 
POWER jack 
(green dot) at 
the back of the 
headset base.

•

Plug one end of the 
corded phone interface 
cable into the CORDED 
PHONE CONNECTION
(orange dot) at the back 
of the telephone base.

•

DSL filter (not 
included) is 
required if you have 
DSL high-speed 
Internet service.

Plug one end 
of the curly 
handset cord 
into the jack 
of the corded 
phone interface 
cable.

•

Plug the 
headset
base power 
adapter into 
an electrical 
outlet not 
controlled by a 
wall switch.

•

Corded phone

Plug other end of 
the corded phone 
interface cable 
into the HANDSET
jack of your corded 
phone.

•

Corded phone 
interface cable