VTech Telecommunications Ltd 80-9480-00 Benutzerhandbuch

Connect the power adapter to the camera unit 

and a power supply not controlled by a wall 

switch.

NOTES

Check the Wi-Fi coverage of your router. Place the 

camera unit at a desired place.
To maintain compliance with the FCC’s RF exposure 

guidelines, place the IP carmera at least 20cm from 

nearby persons.

•

•

Touch to take a snapshot of the current view.

Touch the video icon on the right below the live 

view to switch to record video mode.
Touch to record a video of the current view.

Touch the camera icon will switch back to take 

photo mode.

1.

2.

3.

4.

Your camera package contains the following 

items. Save your sales receipt and original 

packaging in the event warranty service is 

necessary.

6.  Tab to select the Wi-Fi network, and then tab 

Continue.

7.  When you have successfully added the 

camera unit, tab 

View Live Camera to start 

viewing.

TIP

If connection fails, press the 

Pair button on the bottom 

of the camera unit for five seconds to reboot the camera, 

and then add the camera again.

When the blue LED light starts blinking,  

press and hold the 

Pair button on the bottom 

of the camera unit for five seconds.
NOTES
The blue and red LED lights on the camera unit blink 

alternately when pairing.
A “vtech connect“ user account can pair up to 20 IP 

cameras.

5.

•

•

You can set the motion detection and/or sound 

detection functions on. When the function is on, 

the camera will record a video when it captures 

movement or sound.
Set motion detection on/off:

Tab 

Continue.

Then, tab 

Search for camera.

3.

4.

After you have downloaded “vtech connect“, 

create an account and then login.

After powering up the camera unit, wait for a 

moment for it to warm up.
Tab 

Add camera.

1.

2.

Backup lights for night vision.

•

on purchasing your new VTech product. Before 

using this telephone, please read 

safety instructions.
This manual has instructions on how to set up, 

register and operate your new camera.
For support, shopping, and everything new at 

VTech, visit our website at  

2.4GHz IP Wi-Fi Camera

User’s manual

Go to www.vtechphones.com  
to register your product for  
enhanced warranty support and  
latest VTech product news.

VC921

NOTES

Use only the camera power adapter supplied with 

this product.
Make sure the electrical outlet is not controlled by a 

wall switch.
The power adapter is intended to be correctly oriented 

in a vertical or floor mount position. The prongs are not 

designed to hold the plug in place if it is plugged into a 

ceiling, under-the-table or cabinet outlet.
Make sure the camera unit and the power adapter 
cord are out of reach of children.

Make sure you have set up an IEEE 802.11n 

router (not included).

•

•

•

•

User’s  

manual

You can adjust the camera angles by panning or 

tilting the camera head.

The IP camera has infrared LEDs that allow you 

to see the captured views clearly at night or in 

a dark room. When the IP camera detects low 

light levels, the infrared LEDs are switched on 

automatically.

NOTE

When the infrared LEDs are on, the image is in 

black and white. This is normal due to external 

light sources.