DEI Headquarters Inc. NAH2503 Benutzerhandbuch

User guide

  

P. 9  

 

Remote Door Locks 

If your Remote Car Starter was installed with the Remote Door Locks option, you will have the 
convenience of remote keyless entry. See section “Arming the Starter Kill”, earlier in this Guide, 
for further instructions on remote door locking and unlocking. 
Priority Door Access 

If the Remote Door Locks option is installed on your vehicle, this safety feature allows you to 
unlock solely the driver’s door with a single press of the 

 button on the transmitter; upon a 

second press of the 

 button within 6 seconds, all the other doors will unlock. 

Ignition-controlled Door Locks 

This is an added security feature. If your Remote Car Starter was installed with the Ignition-
Controlled Door Locks option, the doors will automatically be locked as soon as the ignition key is 
turned to the 

 position while the brakes are pressed. The remote car starter will 

also lock any door that was unlocked and opened (then closed) the next time the break pedal is 
pressed. When the key is turned to the 

 position, the doors will automatically be unlocked. 

Ignition Relock 

On Remote Car Starters of this series, when Ignition-controlled Door Locks are enabled and the 
ignition key is in the 

 position, should any door be unlocked and opened, all doors 

will be relocked next time the brake pedal is pressed. 
Secure Lock 

(Disabled by default.) Before your vehicle can be remote-started, the factory security system must 
first be disarmed. The Secure Lock feature may be required on certain vehicle models with factory 
security systems that automatically unlock the doors when the security system is disarmed. 
To keep your vehicle protected when the factory security system is disarmed for a remote start, 
Secure Lock will relock your doors as soon as the vehicle is started. Once the engine is shut down 
by remote or after its runtime has expired, Secure Lock will also rearm your factory security system 
and relock the doors. 
Remote Trunk Release 

If your system was installed with the Remote Trunk Release option, you can open your trunk by 
pressing the 

 button for 3 seconds on the remote transmitter. The OEM alarm will be 

disarmed until the 

 button is pressed.  

Safe Start 

If this feature is enabled, the user must press the 

 button twice within 3 seconds to remote-

start the vehicle. This will eliminate accidental remote starts, e.g. when children are playing with the 
transmitter. 

•  To remote-start your vehicle if Swap Start Mode is selected, press 

 and 

 

simultaneously.  

•  The 

 output can be activated by pressing the 

 button. 

Installer-Programmable Valet Mode 
“Home Valet™” Mode 

If configured at installation, this feature will set the vehicle to a no-remote-start mode: if the vehicle 
is parked indoors, there is no danger of it starting accidentally by remote control.  

Note:  Once the home valet mode is activated, the vehicle will not start by remote but the 
OEM alarm functions and starter kill will still be enabled. 

•  Press the 

 or 

 button. 

•  Within 3 seconds, press the 

 and 

 buttons simultaneously.