Ione 4NE993DUSB Benutzerhandbuch
LYNX 99 /3d USB NET MOUSE SPECIFICATIONS
4
ENVIRONMENTAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Temperature
Operating
The operating temperature range shall be from 0 to 70 . There shall be an
operational temperature test of a single cycle, ambient, cold, hot, ambient, and
ambient, With a minimum of a 15 minute dwell (pause) for every 15 increment of
change. The rate of temperature change shall not exceed 20 per hour. The
ambient, With a minimum of a 15 minute dwell (pause) for every 15 increment of
change. The rate of temperature change shall not exceed 20 per hour. The
Joystick will operate normally throughout the cycle requiring no operator
Intervention or corrective actions, except to cause normal movement.
Intervention or corrective actions, except to cause normal movement.
Non-Operating
The non-operating temperature range shall be from-65 to 150 . There Shall
be a thermal shock test of five(5) cycles from-15 to 55 holding for 30 minutes at
each extreme. The rate of temperature change shall not exceed 25 per hour.
be a thermal shock test of five(5) cycles from-15 to 55 holding for 30 minutes at
each extreme. The rate of temperature change shall not exceed 25 per hour.
Normal mouse operation will be verified before and after the thermal shock text.
Humidity
Humidity
Humidity
Humidity
Operating
The operating relative humidity range shall be from10% to 85% non condensing
ambient temperature.
Non-Operating
The non-operating relative humidity range shall be from 10% to 85% non-
Condensing. The mouse shall withstand an environment varying between 25 and
55 , 85% relative humidity, non condensing, for a period of 96 hours.
Condensing. The mouse shall withstand an environment varying between 25 and
55 , 85% relative humidity, non condensing, for a period of 96 hours.
Vibration Test
(Packaged for shipment)
(Packaged for shipment)
(Packaged for shipment)
(Packaged for shipment)
Non-operating
1. 5 to 31 Hz 0.38 mm peak to peak
displacement : Continuous logarithmic rates of 0.5 octave / minute back and
forth.
2. 32 to 500 Hz:0.75 G force limitation:
Continuous logarithmic rates of 0.5 octave / minute back and forth.
3. 5 to 500 Hz Random vibrations: 0.01G2/ Hz for 30 minutes :
Continuous logarithmic rates of 0.5 octave / minute back and forth