Digital Security Controls Ltd. 163G4005 Benutzerhandbuch
26
Universal Cellular Communicator
An SMS feedback will be automatic sent to the sender in the event of success
Enable Level 4
This command is used by the Installer in order to enable the Level 4 access, via a SMS message remotely send a SMS message
consisting of the characters “#ENM” followed by the * character, in accordance with the following formula:
consisting of the characters “#ENM” followed by the * character, in accordance with the following formula:
#ENM*InstallerPIN*
An SMS feedback will be automatic sent to the sender in the event of success.
After a time-out of 12 hour period the Level 4 will be automatically disabled.
Start a remote programming
To start a remote session/programming Communicator via a SMS message remotely, send a SMS message consisting of the char-
acters “#SRS” followed by *DLSIP* and by “DLSPORT” enclosed by the * character in accordance with the following formula:
acters “#SRS” followed by *DLSIP* and by “DLSPORT” enclosed by the * character in accordance with the following formula:
#SRS*DLSIP * DLS *
Where:
DLSIP = Public IP address of DLS 5 PC in the format “AAA.BBB.CCC.DDD” (each octet can be represented with a number
of digits in the range 1 to 3).
of digits in the range 1 to 3).
DLSPORT = Public DLS 5 Port in the format NNNNN (always 5 digits); default 51004.
If in the DLS 5 Console the APN data (access point name, up to 32 characters) is set, the string above is enough to start a session
otherwise the string will be modified as follows:
otherwise the string will be modified as follows:
#SRS*DLSIP*DLSPORT*APN*
In any cases if in the DLS 5 Console USERNAME data (User name for APN, max 32 characters) and password (Password for APN,
max 32 characters) is set, the string above is enough to start a session otherwise the string will be modified as follows:
max 32 characters) is set, the string above is enough to start a session otherwise the string will be modified as follows:
#SRS*DLSIP*DLSPORT*APN*USERNAME*PASSWORD*.