InBody Co. Ltd. BSM170B Benutzerhandbuch
15
2. Optional Settings
1. After turning on the BSM170/170B, press and hold the button and the button on the
measurement unit simultaneously for at least 3 seconds to enter the Setup menu.
measurement unit simultaneously for at least 3 seconds to enter the Setup menu.
2. In the Setup menu, you can calibrate the equipment or reset factory default settings.
1) Calibration: The equipment can be calibrated to ensure correct measurement values.
a. Raise the measurement unit to eye level as illustrated below.
1) Calibration: The equipment can be calibrated to ensure correct measurement values.
a. Raise the measurement unit to eye level as illustrated below.
* The measurement unit should be at least a minimum of 92 cm off the footplate.
Right scales
Left scales
Calibration setup
b. Use the button to move to ‘Cal.’ and then press the button.