InBody Co. Ltd. INBODYBAND Benutzerhandbuch

Seite von 16
 
C. Storage and Operation Conditions 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
D. Charging the Battery 
When you are using the product for the first time after purchase or when you are using it after a long period of 
leaving it idle, please charge the battery appropriately before use. 
To charge the battery, use the USB cable provided to connect the product to a computer.   
 
 
 
Note 
* The battery may also be charged when connected to an Android smartphone charger. 
* Although there is no battery power left, the product will turn on if the charger is connected; it is recommended 
to charge the battery for a few minutes at least before turning the product on. 
* The InBody test and heart rate measurement functions may not be used while charging. 
*  It  takes  1  hour  to  charge  the  battery  completely  and,  and  product  may  be  used  for  up  to  5  days  on  a  single 
charge. This battery usage time is based on the initial manufacturing condition. The battery charging time and 
usage time may vary according to operation conditions. 
 
E. Maintenance Information 
 
Caution
 
* This product is not completely waterproof. Avoid getting liquid on the product and do not use the product in 
humid places. 
*  Do  not  allow  any  foreign  substances  such  as  food,  drink,  and  liquid  detergents  get  inside  the  device.  Once 
inside, foreign substances could cause critical damage on the electronic parts. 
* When in a humid place or if wet, the InBody test function may not work correctly. 
Transport and Storage Condition 
Temperature range 
    -10 to 70 ºC (14 to 158 ºF) 
Relative humidity 
    10 to 80 % (no condensation) 
Atmospheric pressure range 
    50 to 106 kPa 
 
Operation Condition 
Temperature range 
    -10 to 50 ºC (14 to 122 ºF) 
Relative humidity 
    30 to 75 % 
Atmospheric pressure range 
    70 to 106 kPa