ADC Telecommunications Inc. DLC1902B Benutzerhandbuch
ADCP-75-158 • Issue 1 • July 2003 • Section 4: Operation
Page 4-18
© 2003, ADC Telecommunications, Inc.
© 2003, ADC Telecommunications, Inc.
2. Right-click on the Host Fwd Delay section of the display (see
Figure 4-14
). The Host
Fwd Delay pop-up screen will open as shown in
Figure 4-15
.
3. Obtain the value of the forward delay as specified in the system design plan. The delay is
adjustable in 0.1
µsec steps.
4. Enter the forward path delay value and click OK to close the pop-up screen and to make
the changes take effect.
5. Repeat the process for reverse delay and diversity reverse delay by right-clicking on the
appropriate delay section (see
Figure 4-14
) and then entering the required delay value in
the pop-up screen.
6. Click OK to close each pop-up screen and to make the changes take effect.
Figure 4-15. Host Fwd Delay Pop-Up Screen