ADC Telecommunications Inc. DVICSRIU800 Benutzerhandbuch
ADCP-75-114 • Issue C • June 2001
Page 7
©
2001, ADC Telecommunications, Inc.
2 INSTALLATION
This
section provides the installation procedures for the RIU. Installation of the various
Digivance
ICS units may proceed separately from the installation of the RIU.
2.1 Tools and Materials
The
following tools are required in order to complete the procedures in this section:
•
Box
cutter
•
Pencil
or scribe
•
Medium
and small size flat-bladed screwdrivers
•
Phillips
screwdriver (#2)
•
TORX
screwdriver (T20)
•
Wire
cutters
•
Wire
stripper
•
Tool
kit for attaching N-type male connectors to coaxial cable
•
Drill
and assorted drill bits (wall-mount installations only)
The
following materials are required in order to complete the procedures in this section:
•
Wall-mount
fasteners (wall-mount applications only)
•
#22
AWG (0.40 mm) category 3 or 5 cable (for external alarm connections)
•
#18
AWG (1.00 mm) insulated stranded copper wire (for chassis grounding wire)
•
Ring
terminal for #18 wire (for chassis ground wire connection)
•
High
performance, flexible, low loss 50-ohm coaxial cable
•
N-type
male connectors
•
Wire
ties
2.2 Unpacking and Inspection
This
sub-section provides instructions for opening the shipping boxes, verifying that all parts
have
been received, and verifying that no shipping damage has occurred. Use the following
procedure
to unpack and inspect the RIU:
1. Open the shipping carton and carefully unpack the RIU from the protective packing
material.
2. Check the RIU for broken or missing parts. If there are any damages, contact ADC (see
section
5 at the end of this manual) for an RMA (Return Material Authorization) and to
reorder
if replacement is required.