Buffalo 09101884-0 Benutzerhandbuch
WCR-HP-GN User Manual
50
Chapter 4 Configuration
WDS (Bridge Mode only)
Configure the settings for WDS bridging here. Refer to page 15 for the WDS setup process.
Note: You cannot specify WDS while the device is in the router mode.
Change the mode to bridge on TOP screen to display WDS configuration screen.
Parameter
Meaning
WDS
Enable to use WDS.
Connection type
Select how you want to configure WDS.
Manual
Enter the target wireless AP's SSID and security information
Enter the target wireless AP's SSID and security information
manually.
AOSS
Connect with the AirStation using AOSS. If this option is selected,
Connect with the AirStation using AOSS. If this option is selected,
a special AOSS button will appear. This button can be used for
WDS connection only. Once AOSS connection is set up, the WCR-
GN will have the same security setting as the other AP in the
bridge. Refer to page 15 for setup directions.
WDS connection only. Once AOSS connection is set up, the WCR-
GN will have the same security setting as the other AP in the
bridge. Refer to page 15 for setup directions.