Buffalo 000000019 Benutzerhandbuch
![Buffalo](https://files.manualsbrain.com/attachments/9b1b53b017a12138833f39c4f8c1f2aa34c2c16e/common/fit/150/50/266e1b8b2619927602ffd298e5482e1aaec72f4e72045ee85919e6306019/brand_logo.png)
43
Connect by WPS PIN
Before starting, check that the connection method is auto.
1
Before starting, the print server’s connection method should be set to ‘Auto’. The target access point should have its
WPS screen open.
WPS screen open.
2
Navigate to Network - Wireless LAN - WPS Settings.
3
Note the displayed PIN, then click Execute WPS.
4
Within 2 minutes, register the PIN with the target access point.
5
Confirm that “WPS Success” is displayed. If the following window is not displayed, the connection could not be
established. Try again.
established. Try again.
6
Disconnect the Ethernet cable from the print server.
7
Disconnect the AC adapter, wait for about 10 seconds, then reconnect the AC adapter.