Measurement Systems International Inc DL7200RFH Benutzerhandbuch
M E A S U R E M E N T S Y S T E M S I N T E R N A T I O N A L
MSI-7200 Dyna-Link
•
User Guide Page 29
hand held remote must be replaced also.
CALIBRATION
The Dyna-Link can not be calibrated remotely. Calibration and set up of the Dyna-Link must be done with
the buttons on the Dyna-Link itself.
the buttons on the Dyna-Link itself.
POWER
The Dyna-Link is powered by two “C” batteries which give approximately 150 hours of battery life. The
Remote is powered by six “AA” batteries, which give approximately 130 hours of battery life. The Dyna-
Link may be turned on without turning on the remote, by pressing the ON button on the Dyna-Link itself.
When the ON button of the hand held remote is pressed, both the Dyna-Link and the hand held remote will
power on. When both the Dyna-Link and the hand held remote are on, pressing either ON button will turn
both units off. When either unit is to be stored for a long time, the batteries should be removed.
Remote is powered by six “AA” batteries, which give approximately 130 hours of battery life. The Dyna-
Link may be turned on without turning on the remote, by pressing the ON button on the Dyna-Link itself.
When the ON button of the hand held remote is pressed, both the Dyna-Link and the hand held remote will
power on. When both the Dyna-Link and the hand held remote are on, pressing either ON button will turn
both units off. When either unit is to be stored for a long time, the batteries should be removed.