KYE Systems Corp GG000P Benutzerhandbuch
ENGLISH
1
User Manual
LED Status
LED Status
Power On
Blue LED On
Pairing
Blue LED blinks quickly
Paired
Blue LED blinks slowly
AUX IN, BT standby
Blue LED On
Power Off
Red LED blinks and turns off
Charging
Red LED On, then turns off when fully-charged
Battery Low
Red LED blinks slowly (see battery recharging)
Pair a Bluetooth Device:
To play audio from a Bluetooth device, you need to turn on your
Bluetooth device and pair it with the SP-960BT.
1.
Turn on the SP-960BT and then press and hold the
button
and the blue LED will flash slowly. When it starts to flash quickly,
this means it is entering pairing mode.
this means it is entering pairing mode.
2.
When you activate your device's Bluetooth function, it will begin
to scan for the device. When “Genius SP-960BT” appears on the
Bluetooth device list, select the SP-960BT. The Bluetooth status
light will blink slowly after pairing is established.
to scan for the device. When “Genius SP-960BT” appears on the
Bluetooth device list, select the SP-960BT. The Bluetooth status
light will blink slowly after pairing is established.
Note 1: Most devices do not require you to key in the pin code. In
case you have to, key in “0000”.
case you have to, key in “0000”.