KYE Systems Corp GMZII Benutzerhandbuch

 

2

receiver to a USB port again. 

4.  If you feel the mouse does not move smooth as usual, it is possible the 

batteries have lost their charge so you need to replace them. 
Remember to put the batteries in the correct direction. 

5.  When the power level of the batteries is low, the red light will be 

always lit to remind you to replace the batteries 

6.  In case the connection has been lost by accident, a ‘Binding File” is 

available within the CD driver. Double click on the file for the product 
you purchased, and the wireless connection will be re-established   

 
DPI Switch   
Press the three buttons together (Left + Right Button) for approximately 
five seconds to change the resolution to 800 dpi. Press them again and the 
resolution returns to 1600 dpi. (Default resolution is 1600 dpi). When dpi 
has been adjusted, the screen indicates the resolution that you are using 
when the driver has been installed.   
 
Button Assignments in Mouse mode 
Note: When in mouse mode there will be NO 
blue light in the sensor. 
1.  Press and hold on to the side button as 

indicated and gently slide your finger over 
the crystal sensing area to activate the turbo 
scroll function and release the side button to 
disable. You can adjust the speed of the 
turbo scrolling function (two speeds) 
depending upon the pressure of your finger 
on the sensor. 

2.  Left Button: Provides traditional mouse functions such as click 

double click and drag.