KYE Systems Corp GMZKW Benutzerhandbuch
GM-130016/T(NS-6000)
English
Hardware Installation
1. You can connect the receiver to a USB port of a PC.
2. Install one AA battery in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the mouse.
Factory Settings
1. You can connect the receiver to a USB port of a PC.
2. Install one AA battery in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the mouse.
Factory Settings
1.
Left Button: Provides traditional mouse functions like click, double click and
drag.
drag.
2.
Magic-Roller: Press the “Magic-Roller” to surf the Internet and Windows
documents.
documents.
3.
Right Button: Provides traditional mouse click functions.
Warning: (Troubleshooting)
1.
Do not use the wireless optical/laser mouse on a desk which is made of glass or
mirror.
mirror.
2.
The connection of the wireless device is factory preset, so when you plug the
USB receiver into any USB port, the connection between the micro receiver and
the mouse will be established automatically.
USB receiver into any USB port, the connection between the micro receiver and
the mouse will be established automatically.
3.
In case your PC did not install the hardware successfully, remove the micro
receiver from the USB port and go Human Interface Devices under Device
Manager to remove the mouse then plug in the micro receiver to a USB port
again.
receiver from the USB port and go Human Interface Devices under Device
Manager to remove the mouse then plug in the micro receiver to a USB port
again.
4.
If you feel the mouse does not move smooth as usual, it is possible the batteries
have lost their charge so you need to replace them. Remember to put the batteries
in the correct direction.
have lost their charge so you need to replace them. Remember to put the batteries
in the correct direction.