KYE Systems Corp GMZL4 Benutzerhandbuch
English
1
Product name: DX-7100
Model names: GM-130027/S
Hardware Installation
1. You can connect the receiver to a USB port of a PC.
2. Install one AA battery in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the
Model names: GM-130027/S
Hardware Installation
1. You can connect the receiver to a USB port of a PC.
2. Install one AA battery in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the
mouse.
Factory Settings
1.
Left Button: Provides traditional mouse
functions like click, double click and drag.
functions like click, double click and drag.
2.
Magic-Roller: Press the “Magic-Roller” to
surf the Internet and Windows documents.
surf the Internet and Windows documents.
3.
Right Button: Provides traditional mouse
click functions.
click functions.
Note: Download the programmable driver
from Genius website at www.geniusnet.com
from Genius website at www.geniusnet.com
Warning: (Troubleshooting)
1.
Do not use the wireless optical/laser
mouse on a desk which is made of glass or mirror.
mouse on a desk which is made of glass or mirror.
2.
The connection of the wireless device is factory preset, so when you plug
the USB receiver into any USB port, the connection between the micro
receiver and the mouse will be established automatically.
the USB receiver into any USB port, the connection between the micro
receiver and the mouse will be established automatically.
3.
In case your PC did not install the hardware successfully, remove the micro
receiver from the USB port and go Human Interface Devices under
Device Manager to remove the mouse then plug in the micro receiver to a
USB port again.
receiver from the USB port and go Human Interface Devices under
Device Manager to remove the mouse then plug in the micro receiver to a
USB port again.