Everspring Industry Co Ltd AC134 Benutzerhandbuch
AC134-C User Manual
Page 4 of 6
6. How to set up the device?
1. Power supply :
1.1
Mini USB adapter (main) : plug in mini USB
1.2
Battery(support, when power cut) : open back cover and put in AA*3
2. U-Net binding first :
2.1
Into the binding mode : Press the learning button at least 3 seconds
untill the LED light burn out, and unlock the button in 2 seconds. The
LED will last 30 seconds under the binding mode.
2.2
Clear the binding record : Press the learning button at least 6
seconds untill the LED light burn out under the binding mode, and
unlock the button in 2 seconds.
2.3
Quit the binding mode : Press the learning button under the binding
mode, and the LED will be blinking 3 times.(0.1s on,0.1s off)
3. IR binding :
3.1
It can memorize 16 IR.
3.2
Choose SC103 Controller, set up the number of IR key (1~16), and
press “learn” button, then LED will be 0.5s on and 0.5s off, aim the
controller at the AC134, press the button of the controller. When
binding is successful, the LED light will burn out.
3.3
After the binding is successful, press the “send ”button, will send the
memorized IR key number command.
3.4
Press “Delete All”, all IR key information will be removed.