Semnox Solutions Private Limited SPRW001 Benutzerhandbuch
PARAFAIT HARDWARE MANUAL
2011
S E M N O X S O L U T I O N S P V T L T D .
Page 5
been concluded that this is extremely cumbersome for the users and
alternate mechanism has to be developed
alternate mechanism has to be developed
2. Enter through setting up the ADHOC network - Adhoc is considered as a
point-to-point network in which each wi-fi device is linked directly to every
other wi-fi device on the adhoc network. In Adhoc mode the module itself
creates an "On Demand" network to which we can connect our computer
as we connect other networks. IP Addresses are usually assigned through
Auto IP. In our case
point-to-point network in which each wi-fi device is linked directly to every
other wi-fi device on the adhoc network. In Adhoc mode the module itself
creates an "On Demand" network to which we can connect our computer
as we connect other networks. IP Addresses are usually assigned through
Auto IP. In our case
a. When the wifi device is taken into ADHOC network mode, it’ll
setup network parafait_:xx:xx – where xx:xx are the last 4
digits of the MAC Address of the wi-fi chip
digits of the MAC Address of the wi-fi chip
b. The laptop is used to connect to this ADHOC network. It’ll be
assigned an IP in the range 169.254.x.x by the device
c. The below specified program will then telnet to the wi-fi
device and configure the parameters as entered by the user.
Connecting to the Adhoc network from the computer
1. Go to network connections and select view wireless networks.
2. Select the parafait_: XX: XX where XX: XX are the last 4 digits of the MAC
Address.
Address.
a. This will be an open network which does not ask for a pass phrase
or pass key.
b. It will take some time for windows to auto assign an IP and get
connected to the network. The IP address assigned by windows auto IP
must be on the subnet 169.254.x.y (this can be checked by going to the
command prompt and giving the command ipconfig).Obtaining the ip
address in the range(169.254.x.y) ensures that the user has got connected
to the ADHOC network.
connected to the network. The IP address assigned by windows auto IP
must be on the subnet 169.254.x.y (this can be checked by going to the
command prompt and giving the command ipconfig).Obtaining the ip
address in the range(169.254.x.y) ensures that the user has got connected
to the ADHOC network.